लेसर कटिंग मशीन कोणत्या प्रकारची सामग्री कट करू शकते?

21 व्या शतकाच्या सुरूवातीस, fiber laser cutting machine cut pipe have been continuously developed, laser cutting technology will be applied in various fields, and more and more suitable materials will be used. According to the different characteristics of different materials, the matters needing attention when using the fiber laser cutting machine are also different.

स्ट्रक्चरल स्टील

जेव्हा ऑक्सिजनसह सामग्री कापली जाते तेव्हा चांगले परिणाम मिळतील. प्रक्रिया गॅस म्हणून ऑक्सिजन वापरताना, पठाणला धार थोडीशी ऑक्सिडाइझ होईल. 4 मिमी पर्यंत जाडी असलेल्या प्लेट्ससाठी नायट्रोजनचा उपयोग उच्च-दाबाने कापण्यासाठी प्रोसेसिंग गॅस म्हणून केला जाऊ शकतो. या प्रकरणात, पठाणला धार ऑक्सीकरण होणार नाही. 10 मिमी पेक्षा जास्त जाडी असलेल्या प्लेट्ससाठी, लेझरसाठी विशेष प्लेट्स वापरा आणि चांगले परिणाम मिळण्यासाठी प्रक्रियेदरम्यान वर्कपीसच्या पृष्ठभागावर तेल लावा.

स्टेनलेस स्टील

स्टेनलेस स्टीलला कापण्यासाठी आवश्यक आहे: ऑक्सिजनचा वापर, ज्या बाबतीत धार ऑक्सिडेशन फरक पडत नाही; नॉन-ऑक्सिडिझाइड आणि बर्न-फ्री एज मिळविण्यासाठी नायट्रोजन वापरा, पुढील उपचार आवश्यक नाहीत. बोर्डाच्या पृष्ठभागावर कोटिंग ऑइल फिल्ममुळे प्रक्रियेची गुणवत्ता कमी केल्याशिवाय छिद्र पाडण्याचा अधिक चांगला परिणाम मिळेल.

अॅल्युमिनियम

Despite its high reflectivity and thermal conductivity, aluminum materials up to 6mm in thickness can be cut, depending on the alloy type and laser capabilities. When cutting with oxygen, the cutting surface is rough and hard. When using nitrogen, the cut surface is smooth. Pure aluminum is very difficult to cut because of its high purity. Only when a "reflection absorption" device is installed on the system can aluminum be cut. Otherwise the reflection will destroy the optical components.

टायटॅनियम

टायटॅनियम पत्रक प्रक्रिया वायू म्हणून आर्गॉन आणि नायट्रोजनने कापले जाते. इतर पॅरामीटर्स निकेल-क्रोमियम स्टीलचा संदर्भ घेऊ शकतात.

तांबे आणि पितळ

Both materials have high reflectivity and very good thermal conductivity. Brass with a thickness of less than 1mm can be cut with nitrogen; copper with a thickness of less than 2mm can be cut, and the processing gas must be oxygen. Copper and brass can only be cut when a "reflective absorption" device is installed on the system. Otherwise the reflection will destroy the optical components.

कृत्रिम साहित्य

कृत्रिम साहित्य कापताना, कटिंगचे धोके आणि उत्सर्जन होणारे धोकादायक पदार्थ लक्षात ठेवा. कृत्रिम सामग्री ज्यावर प्रक्रिया केली जाऊ शकते ती म्हणजेः थर्माप्लास्टिक, थर्मासेटिंग सामग्री आणि इलास्टोमर्स.


पोस्ट वेळः जून 28-22020
robot
robot
robot
robot
robot
robot