Causes of burst holes when laser cutter that cuts metal punches

During production, cutting laser metal often needs to cut sheets with a thickness of 6mm or more. Many manufacturers have found that when laser cutting mild steel with nitrogen punches sheets with a thickness of 6mm or more, blasting often occurs. The following will analyze laser cutting tool steel measures to avoid this phenomenon:

1. When oxygen is used as laser cut steel online auxiliary gas

The role of oxygen in the 2000w laser cutter cutting process is to support combustion. When the oxygen pressure of laser cutting steel near me is too high, the punching pressure will be too high, and the plate will be broken only in an instant, causing deflagration. When the blowing pressure of laser cutting steel cost per inch is reduced, the process of breaking down the plate will be slowed down, and there will be no deflagration.

2. When other gases are used as auxiliary gases for metal cutting laser cnc

The blasting phenomenon of air as the minimum laser power to cut metal auxiliary gas will be improved. The disadvantage is that it will sacrifice a certain cutting speed. Inert gas can also be selected as the small fiber laser cutter auxiliary gas. The disadvantage is that it will increase the production cost.

3.Adjust the focal length of laser power required to cut metal

4.It is feasible to adjust the focal length to solve the 1kw fiber laser price blasting problem, but the operation is more complicated, and it needs to be tested and fine-tuned according to the actual cutting situation of cnc steel laser cutter to achieve the best effect.


Post time: Nov-23-2020
robot
robot
robot
robot
robot
robot