RFL-1000 series laser

Laser protection

1.The laser part is marked with an icon to indicate that there is a laser output to prevent the laser from directly harming the human body;

2.The outer surface of the laser should be grounded to avoid personal injury due to leakage of the equipment casing;

3.Equip operators with appropriate laser protective glasses, which must be worn during the entire operation;

4.Before operating the equipment, you must check whether the protective equipment is worn;

5.When starting the machine, it is forbidden to look directly at the laser emitting head with eyes at any time;

Hot sale metal sheet  Plate fiber laser cutting machine 1530 5001000150022003300W High Precision metal carbon steel stainless steel fiber laser cutting machine 1530 500w 1kw 1.5kw 2kw 3kw

External transmission fiber protection part

1.The external transmission fiber part of the workstation uses imported high-quality pulleys and restriction devices to fix and guide the laser fiber cable;

2.The transmission fiber is protected by a special laser protective material protective sleeve to prevent laser leakage;

3.Transmission fiber protective sleeve is equipped with laser leakage protection. If the laser leaks due to a fiber break, a laser leak sensor can monitor the laser leak. If a leak is found, the signal will be immediately transmitted to the control center, which will stop the laser output and issue an alarm.

Post time: Dec-20-2019