The iska-sanyaya jini sabon mika wutar ne da wani iska-sanyaya tocilan, kuma aka sani a matsayin iska-sanyaya mika wutar, wanda aka yafi mayar da hankali a jini samar da wutar lantarki a cikin 100A. Kullum, da na kowa CNC jini sabon na'ura aka dace da daban-daban na mika wutar bisa ga kauri daga cikin sabon farantin. A nan, muna magana ne game da iska-sanyaya CNC jini sabon na'ura. The mika wutar da aka yafi bambanta daga ruwa-sanyaya sabon mika wutar. An kullum amfani da su yanke da aiwatar karfe kayan kamar bakin karfe da kuma carbon faranti a kasa 10mm. A takaice, shi ne ta hanyar iska. Halitta sanyaya rage mika wutar surface zafin jiki ga dogon lokacin da amfani. Air-sanyaya jiniyar da gajeriyar sabis rai saboda daban-daban sanyaya hanyoyin.
1. The electrode in the torch, if the center of the wire is burned 2.5--3mm; should be replaced in time, the electrode must be completely cooled (blow with compressed air) when replacing, otherwise the electrode base is heated and swelled tightly. Do not use excessive force when loosening, otherwise the electrode base may be damaged. Before the electrode and nozzle are replaced, it is necessary to check whether the inner cavity is clean and must be used after removing impurities.
2. A lokacin amfani na al'ada, ba zato ba tsammani ji sauti, da baka ne ja, da kuma baka ne a kan shebur. Ya kamata a tsaya nan da nan. A wannan lokaci, lantarki da kuma bututun ƙarfe an lalace. A karfi ta ci gaba da lalata da tocilan. Lantarki da kuma bututun ƙarfe dole ne a musanya shi.
3. The aiki halin yanzu na iska-sanyaya mika wutar kada ta kasance mafi girma daga rated halin yanzu. Idan shi ya wuce, da tocilan za a lalace.
4. Lokacin da ya maye gurbin lantarki da kuma bututun ƙarfe, da babban ikon dole ne a kashe shi. Lokacin da tocilan ba sanye take da wayoyin ko nozzles, da tocilan canji ba za a iya guga man.
5. The matsa iska amfani dole su zama a bushe da tsabta. Saboda ruwa tururi da kuma man ne sauƙin conductive, karkace baki Lines aka generated a kan wayoyin, ya nuna cewa ruwa tururi da kuma man ne da yawa, haifar da wayoyin da bututun ƙarfe rami a takaice-circuited da baka, wanda shi ne sauki lalata da tocilan kuma ba zai iya aiki kullum.
6. The lantarki da kuma bututun ƙarfe a mika wutar wasannin kada ta kasance sako-sako da lokacin yin amfani. Lantarki dole ne a tsaurara tare da wani musamman tsananin baƙin ciki. Yana dole ne a kyan gani, kafin kowane amfani. Idan shi ne sako-sako da, yi amfani da wani musamman tsananin baƙin ciki ya ƙara ja da shi a kowane lokaci, amma ba za ka iya amfani da wani daidaitacce tsananin baƙin ciki kayan aiki.
Post lokaci: Sep-02-2019
