Dhuxul goynta plasma The hawada-qaboojiyey waa qori ololaya hawada-qaboojiyey ah, sidoo kale loo yaqaan sida qori ololaya oo hawada-qaboojiyey ah, kaas oo inta badan ku urursan korontada plasma gudahood 100A. Guud ahaan, mashiinka caadi CNC goynta plasma waxaa kulan la noocyada kala duwan ee toosh sida ay dhumucda saxan goynta. Halkan, waxaan ka hadleynaa CNC Mashiinka hawada-qaboojiyey goynta plasma ah. Shuclada waxaa inta badan kala duwanaayeen ka Dhuxul biyo-qaboojiyey goynta. Waxaa guud ahaan waxaa loo isticmaalaa in qalabka cut iyo biraha nidaamka sida bir oo carbon taarikada ahama hoos 10mm. Marka la soo koobo, waa hawada. qaboojinta Dabiiciga yaraynaysaa heerkulka dusha toosh si loogu isticmaalo muddada-dheer. qoryihii Air-qaboojiyey nolosha adeeg gaaban ay sabab u tahay hababka qaboojinta kala duwan.
1. The electrode in the torch, if the center of the wire is burned 2.5--3mm; should be replaced in time, the electrode must be completely cooled (blow with compressed air) when replacing, otherwise the electrode base is heated and swelled tightly. Do not use excessive force when loosening, otherwise the electrode base may be damaged. Before the electrode and nozzle are replaced, it is necessary to check whether the inner cavity is clean and must be used after removing impurities.
2. Inta lagu jiro isticmaalka caadiga ah, si lama filaan ah maqashaan codka buunka, ARC waa guduudan yahay, iyo qaanso waa on gacaf. Waa in si degdeg ah loo joojiyey. Wakhtigan, ee koronto iyo biiyaha waxyeelo. xoog waxay sii wadi in ay waxyeeleeyaan gubayaan. The koronto iyo biiyaha waa in la beddalo.
3. hadda The shaqo Dhuxul hawada-qaboojiyey waa in aanay noqon ka weyn yahay ay hadda lagu qiimeeyo. Haddii ay ka badan tahay, toosh ku dhaawacmi doonaa.
4. Marka bedelay koronto iyo biiyaha, awoodda ugu weyn waa in lagu demiyo. Marka shuclada laguma qalabaysan electrodes ama nozzles, biiro shuclada laguma cadaadisay karo.
5. hawada tilmaantay Tifaftirayaasha waa in uu ahaadaa mid engegan oo nadiif ah loo isticmaalo. Sababtoo ah uumiga biyaha iyo saliid yihiin si fudud tabinta, khadadka madow muquuninta ahaan on elektaroodhada, taasoo muujinaysa uumiga in biyo iyo saliid aad u badan, ee keenaya electrodes iyo saabka biiyaha in la-gaaban circuited by qaanso, oo waa u fududahay in ay waxyeeleeyaan shuclada oo aan si caadi ah u shaqayn karaan.
6. koronto iyo biiyaha in shuclada waa in aan dabacsan ahaan inta lagu jiro isticmaalka. koronto waa in la adkeeyay la kiyaawo gaar ah. Waa in la viewed inta aan la isticmaalin kasta. Haddii ay tahay dabacsan, isticmaal kiyaawe gaar ah si ay u adkeeyaan wakhti kasta, laakiin ma waxaad isticmaali kartaa qalab kiyaawo hagaajin karo.
waqti Post: Sep-02-2019
