1. Automotive industry. Many extra corners or burrs of the automobile door, automobile exhaust pipe, etc. after forming in many corners of the automobile industry need to be processed. If it is artificial, the accuracy will be difficult to achieve at first, and the efficiency will be much high...
1.Air
Air can be provided directly by the air compressor, so it is relatively cheap compared to other gases. Although the air contains about 20% oxygen, the cutting efficiency is far less than that of oxygen, and the cutting ability is similar to nitrogen. A small amount of oxide film appears ...
Fiber laser cutting machine can only cut metal, not cloth, leather, stone and other non-metals. It belongs to the processing category of metal laser cutting machine. The reason is very simple. The wavelength range of fiber laser cutting machine is not within the absorption range of the above ma...
1. The machine is not running (no refrigeration or pump does not work)
The computer control system is the center of the entire laser marking machine control and command, and it is also the carrier of software installation. Check whether the power cord is connected to the power plug; check whethe...
There is generally no harm in operating a fiber laser marking machine. Laser marking machine is more environmentally friendly than plasma splitting and flame splitting. The plasma cutting machine has a lot of dust, smoke and strong light when cutting. This requires that there must be a matching ...
Controlled fracture cutting
Controlled fracture division refers to high-speed, controlled cutting of brittle materials that are easily damaged by heat by laser beam heating. Laser marking machine uses laser beam to mark the permanent surface of various materials. According to different lasers,...
PIC system
It belongs to an older board control system, which can be integrated into a common computer to run and use background software to control the transmission of analog signals. Although this control system is old, it belongs to a completely open system.
Bochu system
Bochu system is a non...
3. Industrial environmental requirements
category
Situation description
Total equipment weight
7000KG
Electricity meter
20KVA
Gas meter
Compressed air consumption 1m³ / h, cutting gas consumption see cost analysis table
Equipment to the field environment
1. Power supply capacity: 3...
Cutting process parameters
1. Description of processing capacity
material
thickness
Auxiliary gas
Carbon steel
＜12mm
Oxygen
Stainless steel
＜6mm
Nitrogen
Aluminum alloy
＜2mm
Nitrogen
Galvanized sheet
＜4mm
Oxygen
2.Part of the process parameters
De...
Laser protection
1.The laser part is marked with an icon to indicate that there is a laser output to prevent the laser from directly harming the human body;
2.The outer surface of the laser should be grounded to avoid personal injury due to leakage of the equipment casing;
3.Equip operators with ...
1 Laser cutting head
The Swiss Raytools fiber laser cutting head is used with Z-axis follow-up function. The high-speed sensing cutting head uses capacitive sensing to provide a stable and fast automatic cutting height adjustment. A wide range of nozzle designs are available for a wide r...
